OMICRON 7
About this manual
About this manual
This User Manual provides information on how to use the CT Analyzer test set. The CT Analyzer User
Manual contains important safety instructions for working with CT Analyzer and gets you familiar with
operating the CT Analyzer test set. Read and observe the safety instructions described in chapter
1 "Safety instructions" on page 9 and all relevant installation and operation instructions. Following the
instructions in this User Manual will help you to prevent danger, repair costs, and avoid possible down
time due to incorrect operation.
The CT Analyzer User Manual always has to be available at the site where CT Analyzer is used. All
users of CT Analyzer must read this manual before operating the device and observe the safety,
installation, and operation instructions therein.
Reading the CT Analyzer User Manual alone does not release you from the duty to comply with all
relevant national and international safety regulations.
Safety symbols
In this manual, the following symbols indicate safety instructions for avoiding hazards.
DANGER
Death or severe injury will occur if the appropriate safety instructions are not observed.
WARNING
Death or severe injury can occur if the appropriate safety instructions are not observed.
CAUTION
Minor or moderate injury may occur if the appropriate safety instructions are not
observed.
NOTICE
Equipment damage or loss of data possible.
To Next Page
Loading...
Need help?
General
