CT SB2 User Manual
46 OMICRON
9 CT Analyzer test cards for
Advanced MR Test mode
The test cards described in this chapter are only available for the Advanced MR Test mode. Initialize a
new test by selecting "New Advanced MR-Test" from the CT Analyzer main menu to enter the
Advanced MR Test mode.
Depending on the selected standard, the behavior of the CT-Object card may differ slightly from the
normal single-ratio CT test mode without using CT SB2.
See section 9.1 on page 47.
See section 9.2 on page 50.
See section 9.3 on page 54.
To Next Page
Loading...
