OMICRON 57
CT Analyzer test cards for Advanced MR Test mode
9.4 Resistance, Excitation and Ratio card for
Advanced MR Test mode
The Resistance card, the Excitation card and the Ratio card display the detailed test results for the tap
combination specified as "Tap in Use" in the MR-Config. card.
Please refer to the CT Analyzer User Manual for detailed information about these cards.
9.5 Test assessment for Advanced MR Test mode
The automatic test assessment in the Assessment card is always performed for the full tap combination
given by the Number of Taps (e.g. for X1-X5 if number of taps = 5).
Please refer to the CT Analyzer User Manual for detailed information about the Assessment card.
To Next Page
Loading...
Need help?
General
