OMICRON 21
Introduction
2.3.8 Keyboard
Figure 2-7: Keyboard
Table 2-2: Keyboard elements
Key Description
Numeric / character keys for entering values and text.
After pressing a key, the status line displays the character set available for the key.
Press the key as often as required to scroll through the displayed character set.
After 1 second or after pressing another key, the character selected in the status
line is entered into the edit field in the display.
Note: To quickly change between letters and numerics, hold the button pressed for
a second.
Press this key to enter capital letters.
Press this key to display the context-sensitive help system (see section 6.11 on
page 79).
Press this key to delete the character left of the cursor position.
Press this key to leave an edit field without applying a change or to leave the edit
mode of a card or to go one level back in the user interface level.
The CT-Object card is the top user interface level. Pressing this key several times
will always bring you back to the CT-Object card.
Press this key to apply a change for an edit field.
When working in the CT Analyzer file system, use this key to open a selected
folder or to confirm to move back to the next higher level in the file structure.
Use the card selector keys to display a specific card.
Use the cursor keys to select an edit field in the user interface or to move the
cursor within an edit field.
Use the cursor key to enter the edit mode of a displayed card.
To Next Page
Loading...
Need help?
General
