CT SB2 User Manual
16 OMICRON
WARNING
Death or severe injury caused by high voltage or current possible
Observe the following when running tests:
► Prevent the presence of other persons in the potentially dangerous area around the
test object.
► If necessary, perform appropriate additional safety precautions according to the
relevant standard, for example, by defining a high-voltage area around the test object
and securing this area against unauthorized access by using a barrier chain and
warning sign.
► Start the test only if all safety precautions were taken and if you are absolutely sure
that no other person is present in the potentially dangerous area around the test object.
To Next Page
Loading...
Need help?
General
