Omron E5ZN - Page 111

97
Variable Area Map Section 5-10
C3 0022 - Use heater burnout
(See note 1.)
00000000H (0): OFF
00000001H (1): ON
(See note 1.)
0023 Heater burnout latch
(See note 1.)
00000000H (0): OFF
00000001H (1): ON
(See note 1.)
0024 1 Heater burnout hystere-
sis
00000001H to 000001F4H (0.1 to 50.0)
(See note 1.)
0025 - α 00000000H to 00000064H (0.00 to 1.00)
0026 1 MV upper limit Standard: Manipulated variable lower limit + 0.1 to 0000041AH
(manipulated variable lower limit + 0.1 to 105.0)
Heating/cooling: 00000000H to 0000041AH (0.0 to 105.0)
0027 MV lower limit Standard: FFFFFFCEH to manipulated variable upper limit − 0.1
(−5.0 to manipulated variable upper limit − 0.1)
Heating/cooling: FFFFFBE6H to 00000000H (105.0 to 0.0)
0028 Input digital filter 00000000H to 0000270FH (0.0 to 999.9)
0029 - Additional PV display 00000000H (0): OFF
00000001H (1): ON
002A Temperature input offset
display add
00000000H (0): OFF
00000001H (1): ON
002B 1 Alarm 1 latch 00000000H (0): OFF
00000001H (1): ON
002C Alarm 2 latch 00000000H (0): OFF
00000001H (1): ON
002D Alarm 3 latch 00000000H (0): OFF
00000001H (1): ON
002E - Cold junction compensa-
tion method
00000000H (0): OFF
00000001H (1): ON
Variable
type
Address ch Setting data name Description