Omron E5ZN - Communications Setting Level; Communications Data Length (Len); Communications Parity (Prty); Communications Stop Bit (Sbit)

166
Communications Setting Level Section 7-7
7-7 Communications Setting Level
7-7-1 Communications Data Length (len)
Function Setting changes to “communications data length” must be enabled by execut-
ing a software reset or by turning ON the power again.
Communications
Settings
7-7-2 Communications Stop Bit (sbit)
Function Setting changes to “communications stop bit” must be enabled by executing a
software reset or by turning ON the power again.
Communications
Settings
7-7-3 Communications Parity (prty)
Function Setting changes to “communications parity” must be enabled by executing a
software reset or by turning ON the power again.
Communications
Settings
ch Variable type Address
Shared C3 0013 or 0113
Setting range Unit Default
00000007H to 00000008H (7 or 8) Bit 7
ch Variable type Address
Shared C3 0014 or 0114
Setting range Unit Default
00000001H to 00000002H (1 or 2) Bit 2
ch Variable type Address
Shared C3 0015 or 0115
Setting range Unit Default
00000000H to 00000002H
00000000H (0): None (none)
00000001H (1): Even (eUen)
00000002H (2): Odd (odd)
-1: Even