Omron E5ZN - Auxiliary Output 1 Allocation (Sub1); Control Output 2 Allocation (Out2)

148
Initial Setting Level Section 7-5
Communications
Settings
7-5-10 Control Output 2 Allocation (out2)
Function This parameter allocates the data to be output to the control output 2 termi-
nals (terminals 1 and 2.)
Communications
Settings
7-5-11 Auxiliary Output 1 Allocation (sub1)
Function This parameter allocates the data to be output to the auxiliary output 1 termi-
nals (terminals 13 and 15.)
ch Variable type Address
Shared C3 000E or 010E
Settings range Default
Analog output models
E5ZN-2C@F03@-FLK
Pulse output models
E5ZN-2Q@H03@-FLK
E5ZN-2T@H03@-FLK
00000000H (0) ch1 Heating control output ch1 Heating control output 0: Heating con-
trol output for ch1
00000001H (1) Cooling control output Cooling control output
00000002H (2) Alarm 1 and sensor error alarm
OR output
Alarm 1 and HB alarm OR out-
put
00000003H (3) Alarm 2 output Alarm 2 output
00000004H (4) Alarm 3 output Alarm 3 output
00000005H (5) ch2 Heating control output ch2 Heating control output
00000006H (6) Cooling control output Cooling control output
00000007H (7) Alarm 1 and sensor error alarm
OR output
Alarm 1 and HB alarm OR out-
put
00000008H (8) Alarm 2 output Alarm 2 output
00000009H (9) Alarm 3 output Alarm 3 output
0000000AH (10) ch1 SP transfer output
0000000BH (11) Ramp SP transfer output
0000000CH (12) PV transfer output
0000000DH (13) Heating MV transfer output
0000000EH (14) Cooling MV transfer output
0000000FH (15) ch2 SP transfer output
00000010H (16) Ramp SP transfer output
00000011H (17) PV transfer output
00000012H (18) Heating MV transfer output
00000013H (19) Cooling MV transfer output
ch Variable type Address
Shared C3 000F or 010F
Settings range Unit Default
Refer to the table of setting ranges for control output 1 alloca-
tion.
-5: ch2
heating
control
output