Omron E5ZN - Names of Parts on the Front Panel; Display; Front Panel

111
Names of Parts on the Front Panel Section 6-2
6-2 Names of Parts on the Front Panel
6-2-1 Front Panel
6-2-2 Display
No.1 Display Displays the type of PV or parameter for the E5ZN Temperature Controller.
No. 2 Display Displays the PV, read value for the parameter, and the input value when set-
tings are changed for the E5ZN Temperature Controller.
Temperature Unit The temperature unit is displayed when the display unit parameter for the
E5ZN Temperature Controller is set to a temperature. Indication is determined
by the current set value of the “temperature unit” parameter. When this
parameter is set to
°C, “c” is displayed, and when set to °F, “ f” is displayed.
Operation Indicators
1,2,3... 1. SUB1 (auxiliary output 1)
Lit when the auxiliary output 1 function is ON.
SUB2 (auxiliary output 2)
Lit when the auxiliary output 2 function is ON.
SUB3 (auxiliary output 3)
Pulse output models: Always not lit.
Analog output models: Not lit when the auxiliary output drops to 0%
or lower.
Lit when the auxiliary output is above 0%.
SUB4 (auxiliary output 4)
Pulse output models: Always not lit.
Analog output models: Not lit when the auxiliary output drops to 0%
or lower.
Lit when the auxiliary output is above 0%.
2. OUT1 (control output 1)
Pulse output models: Lit when the control output 1 function is ON.
Analog output models: Not lit when the control output drops to 0% or
lower.
Lit when the control output is above 0%.
COPY CH
E5ZN-SDL
STOP
SUB1
SUB2
SUB3
SUB4
OUT1
OUT2
CMW
UNIT/CH
PV
SV
UNIT
Temperature unit
Operation
indicators
UNIT/CH display
Level key
Mode Key UNIT Key COPY Key CH Key
No.1 display
No. 2 display
Up key
Down key