Manual Version e1-4.3.0.ae-R3. Page
Public recipes allows the recipes of the user to be visible to other users.
For users with no privileges a default recipe is required. It is recommended that foundry operator
accounts be set up with no privileges. A number of allowed recipes can be given to the user and by
checking the box next to the recipe name, it can be enabled. For example, a user without the ability to
configure their etch can have, say 20 recipes. However, if only 1 is turned on, they will have access to
only that 1 recipe. This is useful for those operators that may have a series of lots to process and the
Administrator can enable the appropriate recipe for that operator as needed.
To Next Page
Loading...