ORKEL MP2000-X - Lubrication List - Manual Greasing Points

8.8 LUBRICATION LIST - MANUAL GREASING POINTS
MP2000-X:
No: Description: Qty on each side: Location: Total Intervall
1 Elevator, lower 1 Left and right 2 D
2 Handbrake 1 Right 1 M
3 Sub conveyor, elevator side 1 Left and right 2 W
4 Brake shaft, support
3
Left and right 6 M
5 Under elevator, bearings on rollers 3 Left and right 6 W
6 Elevator, upper 1 Left and right 2 W
7 Chamber cylinder 2 Left and right 4 W
8 Chamber and bearings on rollers 4 Left and right 8 W
9 Cylinder, wrapping table 2 Left and right 4 W
10 Wrapping table 3 Left and right 6 W
11 Knife arms, wrapping table 6 Left and right 12 W
12 Wrapping table, support roller 1 Left and right 2 W
13 Emergency stop arm, wrapper 1 Left and right 2 M
Feed hopper F10:
No: Description: Qty on each side: Location: Total Intervall
1 Cylinder 2 Left and right 2 M
2 Bearing 1 Left and right 4 W
3 Hinge point right side 1 Right 4 M
4 Flip cylinder 2
Left, right and
middle
2 M
Telescopic drawbar:
No: Description: Qty on each side: Location: Total Intervall
1 Cylinder 1 1 W
2 Bearing 1 Left and right 2 W
8 LUBRICATION 102