ORKEL MP2000-X - Weighing System; Reset; Software

Figure 6.14 : User list
6.1.14 Weighing system
Weighing system is not supported by the software version described in this doc-
ument.
6.1.15 Reset
From main page; press menu and then the icon for Reset. The reset icon resets
the baling process, so that this starts from the beginning when the machine is put
in auto mode. The reset does not affect the settings, nor the stored user data.
6.1.16 Software
From main page; press menu and then the icon for Reset. The reset icon resets
the baling process, so that this starts from the beginning when the machine is put
in auto mode. The reset does not affect the settings, nor the stored user data.
6 CONTROL SYSTEM 61