1 General
1.1 Introduction 11
1.1.1 Foreword 11
1.1.2 Disclaimer 11
1.1.3 Range of use 12
1.2 Control before delivery 12
1.2.1 Preparation at customer location 12
1.3 Identification of the machine 12
1.4 The operators manual 13
1.4.1 How to use this manual 13
1.5 Warranty 13
1.6 Declaration of conformity 14
1.1 INTRODUCTION
1.1.1 Foreword
The products from Orkel AS are well known for their high quality, reliability and strength. We will therefore
congratulate you, choosing one of our products.
To fulfill our own goals, regarding quality and strength, Orkel AS has implemented a continuing product-
developing process. All compactors undergo a thorough quality control before leaving the factory.
Read thoroughly, and familiarize yourself with our recommendations, regarding machine - safety, use and
maintenance. Make daily maintenance a routine. By doing this, the machine will be safe to operate, and
you will contribute to a longer machine lifespan and an effective utilization of the machine.
With regards
Orkel AS
1.1.2 Disclaimer
The original parts used in an Orkel® machine are designed and built to provide optimal fit, function, safety,
and structural integrity. For this reason, Orkel® DOES NOT in any circumstance approve of the use of after-
market, gray market, or imitation parts.
The information provided by Orkel® hereunder is provided “as is, where is” and with all faults, and the
entire risk associated with such information is entirely with the Buyer.
Orkel® does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP
rights, whether with regard to such information itself or anything described by such information.
Information provided in this document is proprietary to Orkel®, and Orkel® reserves the right, at its sole
discretion, to make any changes or modification to the information in this document or to any products
and services at any time without notice.
Orkel® does not assume responsibility for any damages associated with the machine or failure caused by
incorrect use of the machine. Neither do we assume responsibility for any changes to the product made
after initial delivery.
1 GENERAL 11
To Next Page
Loading...