Noise zone. Use ear protection.
Stairway. Access only for operators or
mechanics.
Make sure the transmission is run-
ning with the correct speed and
direction. Wrong speed and/or
direction can damage machinery and
may cause great danger to persons
nearby. The machine is designed for
a PTO-speed of 850 rpm.
Stay clear, rotating machinery.
Strapping point. Lifting point.
Jacking point.
Hydraulics securing valves, locking the tail-
gate lifting cylinders.
Between the tractor and the machine, there is a rotating PTO-
shaft. No one is allowed to stand between the tractor and the
machine while the engine is running. Do not wear loose clothes,
scarfs etc.
Warning signs, indicating danger or warning attached to the machine, must not be removed or
painted over. Unreadable signs shall be replaced by new ones. These can be ordered from Orkel
AS.
2.3 EMERGENCY STOP
The machine is equipped with 5 manual emergency stop buttons. Four are accessible from ground level
and one on top of the machine as indicated on Figure 2.1.
2 SAFETY 17
To Next Page
Loading...