Loc. ID Description Type Hi Mid Low
X2.14 ---------- NOT IN USE ----------
X2.15 ---------- NOT IN USE ----------
X2.16 S07 E-Stop redundancy input DI X13.3
X2.17 S37 Remote open feed rollers DI B.Bl B.Br
X2.18 V33 Cooler fan run (suck) DO Bk
X2.19 S19 Feed rollers opened DI Bk Bl Br
X2.20 S20 Feed rollers closed DI Bk Bl Br
X2.21 V34 Cooler fan reverse (blow) DO Bk
X2.22 S38 Remote close feed rollers DI B.Y
X2.23 S39 Remote start net DI B.Gn
10.5.3 IO block 3
Loc. ID Description Type Hi Mid Low
X3.1 ---------- NOT IN USE ----------
X3.2 ---------- NOT IN USE ----------
X3.3 ---------- NOT IN USE ----------
X3.4 ---------- NOT IN USE ----------
X3.5 S30 Chamber pressure AI Wh Br
X3.6 S29 Feed hopper US-sensor AI Gy Bl Br
X3.7 S44 Feed hopper start DI C.Gn
X3.8 S45 Feed hopper stop DI C.R
X3.9 ---------- NOT IN USE ----------
X3.10 - F25 control supply (5V) REF C.Br
X3.11 ---------- NOT IN USE ----------
X3.12 ---------- NOT IN USE ----------
X3.13 S16 Chamber dampening DI Bk Bl Br
X3.14 S22 Net knife closed DI Bk Bl Br
X3.15 ---------- NOT IN USE ----------
X3.16 S47 Thermo switch DI R Y
X3.17 Cable detection DI X12.8
X3.18 ---------- NOT IN USE ----------
X3.19 ---------- NOT IN USE ----------
X3.20 S31 Chamber speed PI Bk Bl Br
X3.21 S32 Net control PI Bk Bl Br
X3.22 S35 Elevator speed PI Bk Bl Br
X3.23 ---------- NOT IN USE ----------
10.5.4 IO block 5
Loc. ID Description Type Hi Mid Low
X5.1 V05 Table up DO ·1 ·2
X5.2 V06 Table down DO ·1 ·2
X5.3 V07 Run wrapping table DO ·1 ·2
X5.4 V13 Grease pump DO Bl
10 ELECTRICS 110
To Next Page
Loading...