2.6 Break-in period 20
3 Settings and hydraulic adjustments 22
3.1 Main parts 23
3.1.1 Principle of operation 23
3.2 Hydraulics 23
3.2.1 Guidelines for hydraulic adjustments 24
3.2.2 Tank valves MP2000-X 24
3.3 Feed hopper 24
3.3.1 Control panels 24
3.3.2 Settings 24
3.4 Elevator and sub conveyor 25
3.4.1 Settings 25
3.5 Chamber 25
3.5.1 Opening speed settings 25
3.5.2 Chamber pressure settings 25
3.6 Plastic tying unit 26
3.6.1 Principle of operation 26
3.6.2 Brake and feed speed 26
3.6.3 Settings 27
3.6.4 Remote control 28
3.7 Wrapping table 28
3.7.1 Wrapping settings 28
3.7.2 Film cutter settings 29
3.7.3 Wrapping table tilt speed 30
3.7.4 Wrapping table ultrasonic sensor 30
3.7.5 Microsonic sensor (S1) 30
3.8 Drawbar 31
3.8.1 Telescopic drawbar 31
4 Operation 32
4.1 Safety 33
To Next Page
Loading...