Panasonic FP0 User Manual

Manuals To Be Used FP0
iv
Manuals To Be Used
The required manuals differ according to the units to be used. See the table below.
A: Available
N/A: Not available
Unit type User’s manual
No.ARCT1F389E
Programming manual
No.ARCT1F313E
Manual No.
FP0 Control unit A A N/A
FP0 Expansion unit A A N/A
FP0 Thermocouple unit A A ARCT1F366E
FP0 Analog I/O unit A A ARCT1F390E
FP0 A/D conversion unit A A ARCT1F321E
FP0 D/A conversion unit A A ARCT1F382E
FP0 CC−Link slave unit A A ARCT1F380E
FP0 I/O link unit A A N/A
FP0 Power supply unit A A
N/A
− A suffix “−1” is added to the end of manual numbers when the manuals
have been revised. The final number increases for every revision.
− <FPWIN GR Technical Guide Book ARCT1F332E> is supplied with the
standard ladder tool software FPWIN GR.
− <FPWIN Pro Technical Guide Book ARCT1F405E> is supplied with the
programming tool software FPWIN Pro.
Key Point: The PDF versions are provided at our website.
http://www.mew.co.jp/ac/e/fasys/
(User registration is required. Free of charge)

Panasonic FP0 Specifications

General

Model	FP0
Communication Ports	RS232C, RS485
Power Supply	24V DC
Operating Temperature	0°C to 55°C
Type	Programmable Logic Controller (PLC)
I/O Points	16 to 128