Panasonic KX-TD500 - Illegal Number - DISA; Illegal Number - DDI; DID; Illegal Number - TIE; Sending Dial Tone to TIE Trunk

System
Programming Guide 103
Parameter 21. Illegal Number - DISA
Default Send reorder tone
Value Range
1. Send reorder tone
2. Transferred to IRNA destination
Description/Function Specifies the treatment of the invalid DISA calls.
Reference • 1.5 Attended Features (F/G)
– Direct Inward System Access (DISA)
Parameter 22. Illegal Number - DDI / DID
Default Send reorder tone
Value Range
1. Send reorder tone
2. Transferred to IRNA destination
Description/Function Specifies the treatment of the invalid DDI / DID calls.
Reference • 1.5 Attended Features (F/G)
– Direct Inward Dialling (DID)
• 2.4 ISDN Attended Features (F/G)
– Direct Dialling In (DDI)
Parameter 23. Illegal Number - TIE
Default Send reorder tone
Value Range
1. Send reorder tone
2. Transferred to IRNA destination
Description/Function Specifies the treatment of the invalid TIE calls.
Reference • 3.1 TIE Line Features (F/G)
– TIE Line Service
Parameter 24. Sending dial tone to TIE trunk
Default Disable
Value Range
1.
Enable
2. Disable
Description/Function Specifies whether or not the system sends a dial tone to a TIE caller
after recognising an incoming TIE call.
Reference • 3.1 TIE Line Features (F/G)
– TIE Line Service