Panasonic KX-TD500 - DSS Console Copy; Copying the DSS Console Parameters to Other DSS Consoles

Line
Programming Guide 207
DSS Console Copy
Used to copy a part of or all settings of a certain DSS Console to all other DSS Consoles at a
time. You can also specify one or several DSS Consoles as the copy destination.
Copying the DSS Console Parameters to Other DSS Consoles
1. Edit the parameters of the copy source DSS Console and save it.
2. Point to on "4-3 DSS Console" screen of the copy source and click.
• "DSS Console Copy" screen is displayed.
• The current DSS Console (copy source) number is shown as "Copy from XXX
XXXXX- XX."
3. Select the DSS Console parameters to copy in "Copy Item" field.
• Items marked with " " are copied.
4. Point to in the "Destination DSS Console" field and click.
• All displayed DSS Console Nos. will be highlighted.
• You can also specify one or several DSS Consoles as the copy destination by clicking it
(them) directly.
5. Point to and click.
• "Are you sure?" is displayed.
6. Point to and click.
• "Copying" is displayed while the source data is being copied to the destination.
• Parameters of the destination DSS Consoles are immediately effective when copying is
finished.