Line
238 Programming Guide
4.8.2 PC Console Line 2/2
Used to assign parameters for PC Console lines.
Parameter [Call Log Incoming] Lock Password
Default Blank
Value Range Fixed to 3 digits consisting of 0-9
Description/Function Specifies the Call Log Incoming, Log Lock password.
The PC Console user can lock the call log display so that incoming
call information is not shown on the PC Console.
Note
• The Manager and the Operators can cancel the Call Log
Lock in case the user forgets the lock code (Incoming Call
Log Lock Control).
Reference • 2.10.3 Denying Other People the Possibility of Seeing Your Call
Log (Incoming Call Log Lock) [KX-T7533, KX-T7536, KX-
T7230, KX-T7235 only] (U/M)
To Next Page
Loading...
