Panasonic KX-TD500 - Special Dial Tone after Setting Feature; Duration Starting Mode

System
98 Programming Guide
Parameter 15. Special dial tone after setting feature
Default Enable
Value Range
1. Enable
2. Disable
Description/Function If enabled, the system notifies the extension user by sending a
special dial tone (Dial Tone 2) when one or more of the following
features are assigned on his extension.
• Absent Message Capability
• Background Music (BGM)
• Call Forwarding
• Call Pickup Deny
• Call Waiting
• Data Line Security
• Do Not Disturb (DND)
• Electronic Station Lockout
• Executive Busy Override Deny
• Paging Deny
• Pickup Dialling
• Timed Reminder
Also enabled is Dial Tone 4 (indicates that messages are waiting).
Note
• Dial Tone 3 is not affected by this setting.
Reference • 5.4 What is This Tone? (U/M)
Parameter 16. Duration starting mode
Default Answer or Time-out
Value Range
1. Answer or Time-out
2. Answer
Description/Function Specifies the call duration count start timing.
Reference None