Features
Programming Guide 243
5.2 System Speed Dialling
Used to programme a list of up to 1000 (000-999) frequently dialled numbers per tenant.
Anyone in the same tenant can dial these numbers.
Up to 2000 Speed Dialling codes can be shared among tenants under the limitation of 1000
codes per tenant. The maximum number of Speed Dialling numbers per tenant is specified in
"2-1 Tenant" screen.
You can import System Speed Dialling data in your PC. This is functional when the PC
maintenance console is connected in the interactive mode. Please refer to "System Speed
Dialling" of Section "1.7 Dialling Features" in the Features Guide for further information.
Parameter Tenant No.
Default 1
Value Range 1-8
Description/Function Specifies the tenant to which the System Speed Dialling codes are
assigned.
(Required when "Tenant Service" is employed.)
Reference • 1.3 System Features (F/G)
– Tenant Service
• 2.2 Tenant (P/G)
To Next Page
Loading...
