Panasonic KX-TD500 - Local Hunt Sequence; Trunk Group No.

System
90 Programming Guide
2.6 Local Hunt Sequence
Specifies the trunk group hunt sequence to be used when an extension user attempts to make
an outside call by dialling the feature number for "Local CO Line Access / ARS" or by pressing
a Loop-CO key.
Parameter Trunk Group No.
Default 01: 1, Others: None
Value Range None, 1-48
Description/Function Specifies the trunk group (1-48) in hunting order.
Notes
• Local Hunt Sequence works only when ARS (Automatic
Route Selection) mode is turned off.
• The sequence can be used by any extension user in the
system regardless of the tenant but trunk groups will be
skipped if they do not belong to the same tenant as the
extension user.
Reference • 1.6 Originating Features (F/G)
– Trunk Access
• 2.2.1 Basic Calling (U/M)