Line
198 Programming Guide
4.3.2 Flexible CO Key Assignment
Used to determine the usage of flexible CO buttons on PTs.
The following screen is displayed by clicking on "4-2 Extension Line" screen.
Parameter [Call Log Incoming] Lock Password
Default Blank
Value Range Fixed to 3 digits consisting of 0-9
Description/Function Specifies the Call Log Incoming, Log Lock password.
The extension user can lock the call log display so that incoming
call information is not shown on the display.
Note
• The Manager and the Operators can cancel the Call Log
Lock in case the extension user forgets the lock code.
(Incoming Call Log Lock Control)
Reference • 2.10.3 Denying Other People the Possibility of Seeing Your Call
Log (Incoming Call Log Lock) [KX-T7533, KX-T7536, KX-
T7230, KX-T7235 only] (U/M)
To Next Page
Loading...
