System
80 Programming Guide
Parameter Transfer Recall Time
Default 12 rings
Value Range 0-48 rings
Description/Function Specifies the number of rings before transfer recall occurs. If a
transferred call is not answered before the programmed number of
rings, the call returns to the extension user who originally
transferred it or an Operator depending on the setting of "6.
Transfer recall destination" in Section "2.8 System Option."
Note
• If "0" is specified, Transfer Recall does not occur.
Reference None
Parameter Pickup Dial Waiting Time
Default 1 s
Value Range 0-5 s
Description/Function Specifies the length of time in seconds that the system is to wait
after an extension user goes off-hook for making a call before the
system automatically dials the pre-assigned telephone number for
Pickup Dialling.
Note
• This waiting time gives the extension user an opportunity to
dial another number before automatic dialling is performed.
Reference • 1.7 Dialling Features (F/G)
– Pickup Dialling (Hot Line)
• 2.2.2 Easy Dialling (U/M)
To Next Page
Loading...
