Group
Programming Guide 139
Extension Group Copy
Used to copy a part of or all settings of a certain Extension Group to all other Extension Groups
at a time. You can also specify one or several Extension Groups as the copy destination.
Copying the Extension Group Parameters to Other Extension Groups
1. Edit the parameters of the copy source Extension Group and save it.
2. Point to on "3-2 Extension Group" screen of the copy source and click.
• "Extension Group Copy" screen is displayed.
• The current Extension Group (copy source) number is shown as "Copy from Extension
Group 1-128."
3. Select the Extension Group parameters to copy in "Copy Item" field.
• Only parameters which are available to copy are shown in "Copy Item" field.
This depends on the Group Type assignment of the copy source Extension Group.
• Items marked with " " are copied.
4. Point to in the "Destination Extension Group" field and click.
• All displayed Extension Group Nos. will be marked with " ."
• You can also specify one or several Extension Groups as the copy destination by
clicking it (them) directly.
5. Point to and click.
• "Are you sure?" is displayed.
6. Point to and click.
• "Copying" is displayed while the source data is being copied to the destination.
To Next Page
Loading...
