Panasonic KX-TD500 - Automatic Adjustment of the Clock Using Caller ID Information; DISA Prolong Operation; Dialing * in DISA CO-To-CO Talking

System
Programming Guide 97
Parameter 12. Automatic adjustment of the clock using
Caller ID information
Default No
Value Range
1. Yes
2. No
Description/Function Enables or disables the automatic adjustment of the clock by Caller
ID information once a day.
Reference • 1.5 Attended Features (F/G)
– Caller ID Service
Parameter 13. DISA prolong operation
Default No limit
Value Range
1. Limited (10 times)
2. No limit
Description/Function Specifies the number of times that the DISA caller can prolong the
duration of DISA CO-to-CO line call.
Reference • 1.5 Attended Features (F/G)
– Direct Inward System Access (DISA)
Parameter 14. Dialing "*" in DISA CO-to-CO talking
Default Disconnect and make a new call
Value Range
1.
Disconnect and make a new call
2. Send out Dial " "
Description/Function
The " " key can be entered during a DISA CO-to-CO line call. The
action taken by the system depends upon this setting.
If "Disconnect and make a new call" is selected, then the system
will disconnect the current call and prepare for a new call.
Otherwise, the will be transmitted down the line to the other
party.
Reference • 1.5 Attended Features (F/G)
– Direct Inward System Access (DISA)