Panasonic KX-TD500 - Class of Service (COS); COS No.

System
68 Programming Guide
2.4 Class of Service (COS)
2.4.1 Class of Service (COS) 1/2
Used to assign the Class of Service (COS) parameters.
Parameter COS No.
Default 1
Value Range 1-96
Description/Function Specifies the COS (1-96) which you are going to programme.
Reference • 1.3 System Features (F/G)
– Class of Service (COS)
• 4.3 Extension Line (P/G)
Parameter Trunk Group Setting
Default —
Value Range —
Description/Function You can enter into "Trunk Group Setting" screen (Section 2.4.2) by
clicking on this screen.
Reference None