Panasonic KX-TD500 - Automatic Hold; Sdn Cos; Charge Management

System
74 Programming Guide
Parameter Automatic Hold
Default Disable
Value Range
1. Enable
2. Disable
Description/Function Used to turn on / off "Automatic Hold" feature.
Reference • 1.10 Holding Features (F/G)
– Automatic Hold—For Hold
– Automatic Hold—For Transfer
Parameter SDN COS
Default Own Extension
Value Range
1. Own Extension
2. PDN
Description/Function This setting is applied when an extension user makes an outside call
using an SDN button on his own extension.
(Assignable for a DN type PT extension only.)
1. Own Extension:
COS (TRS level) of his own extension is applied to the call
when making an outside call using the SDN button.
2. PDN:
COS (TRS level) of the owner extension is applied to the call
when making an outside call using the SDN button.
Reference • 4.1.2 Customising the Buttons (U/M)
Parameter Charge Management
Default Disable
Value Range
1. Enable
2.
Disable
Description/Function Enables or disables the ability of performing "Charge
Management" feature.
Reference • 1.3 System Features (F/G)
– Charge Fee Reference
• 4.2 Charge Fee Management (Station Programming) (U/M)