Group
Programming Guide 145
Parameter [UCD Setting] FWD No Answer
Default Disable
Value Range
1. Disable
2. Enable
Description/Function Specifies the treatment of the call which is not answered by the
extension in the UCD group within a specified period of time (Call
Forwarding - No Answer Time).
1. Disable:
The call continues to ring the current destination extension.
2. Enable:
The system transfers the call to an idle extension in the group.
Reference • 1.3 System Features (F/G)
– Extension Group
• 1.5 Attended Features (F/G)
– Uniform Call Distribution (UCD)
Parameter [UCD Setting] Auto LOGOUT Mode
Default Disable
Value Range
1. Disable
2. 1-10 times
Description/Function Specifies the treatment of extensions in a UCD group who do not /
cannot answer the call.
A member extension may be logged-out automatically, if it does
not answer the call for pre-determined times (1-10) consecutively.
If "Disable" is specified, this setting does not function.
Reference • 1.3 System Features (F/G)
– Extension Group
• 1.5 Attended Features (F/G)
– Uniform Call Distribution (UCD)
To Next Page
Loading...
