Panasonic KX-TD500 - Auto Start Time; Inter-Tenant Calling (1 - 8); Day (SUN-SAT); Night (SUN-SAT)

System
Programming Guide 43
(Auto Start Time)
Specifies "Start" time of DAY / NIGHT / LUNCH / BREAK service on a day of the week
basis.
(This setting is valid when "Auto mode" is selected in "DAY / NIGHT Switching Mode"
setting.)
Up to four time frames (Day, Night, Lunch-Start, Lunch-End, Break-Start, Break-End) can be
set up on each day of the week.
Parameter Inter-tenant Calling (1 - 8)
Default No check
Value Range
1. No check [Disallowed]
2. Check [Allowed]
Description/Function Specifies other tenant numbers to which extensions in this tenant
can make a call.
If no tenant numbers are checked in this field, extension users
within this tenant cannot make a call to extensions in other tenants.
Making calls from one tenant to another is not allowed by default.
Reference • 1.3 System Features (F/G)
– Tenant Service
Parameter Day (SUN-SAT)
Default 9:00 AM
Value Range
1. Disable
2. 12:00-11:59 PM / AM
Description/Function Specifies the start time for Day Service.
Reference • 1.3 System Features (F/G)
– Night Service
Parameter Night (SUN-SAT)
Default 5:00 PM
Value Range Same as Day
Description/Function Specifies the start time for Night Service.
Reference • 1.3 System Features (F/G)
– Night Service