Programming Error Messages
Programming Guide 355
11.3 Information Message (IXXXX)
Code
Message
Description
I0001 Upload completed. Please change PBX to on-line mode.
Uploading the system programming data from PC to PBX is completed.
How to change PBX to on-line mode:
1. Set CPU Mode Rotary-Switch position to 0.
2. Then, press Reset button.
I1000 Please set up VPS port in '1-4 VPS (DPT) Port Assignment' screen.
The attribute(s) of extension(s) have been set up as VPS (DPT). Please set up the
port(s) in '1-4 VPS (DPT) Port Assignment' screen.
To Next Page
Loading...
