Panasonic KX-TD500 - Calls to Empty Group; [UCD Setting] Time Table No.

Group
144 Programming Guide
Parameter Calls to Empty Group
Default Disable
Value Range
1. Enable
2. Disable
Description/Function Allows for calls to empty (all Logout) Operator or UCD Groups to
be queued.
If enabled, calls will be queued to the group.
If disabled, the extension will receive a reorder tone, and the CO
call will be transferred to the overflow destination immediately.
(Assignable only when "Operator" or "UCD" is specified in "Group
Type" programming.)
Reference • 1.3 System Features (F/G)
– Extension Group
– Operator Group
• 1.5 Attended Features (F/G)
– Uniform Call Distribution (UCD)
Parameter [UCD Setting] Time Table No.
Default None
Value Range None, 1-32
Description/Function Specifies the UCD Time Table (1-32) for the UCD Group.
Reference • 1.3 System Features (F/G)
– Extension Group
• 1.5 Attended Features (F/G)
– Uniform Call Distribution (UCD)