Private Network
Programming Guide 303
8.2 TIE Routing Table
Used to specify trunk groups and parameters required for making TIE calls.
This table is referenced by the system to identify the trunk route, when an extension user made
a TIE call by dialling the feature number for "TIE Line Access" or "Other PBX 01-16."
The first 3 digits (other than TIE Line Access Code) of the dialled number decide a routing
pattern appropriate for each call. Up to 36 routing patterns can be programmed in this table.
Parameter Entry No.
Default 01-08
Value Range 01-36
Description/Function Specifies the entry number of Routing Table which you are going
to programme.
Reference • 3.1 TIE Line Features (F/G)
– TIE Line Service
Parameter PBX Code
Default Blank
Value Range Up to 3 digits consisting of 0-9
Description/Function Specifies the ID code for your PBX.
(Required when your PBX is a part of a TIE Line Network.)
Reference • 3.1 TIE Line Features (F/G)
– TIE Line Service
To Next Page
Loading...
