Group
156 Programming Guide
Parameter FWD / DND Mode
Default Enable
Value Range
1. Disable
2. Enable
Description/Function Specifies whether to enable or disable the FWD / DND (Call
Forwarding or Do Not Disturb) feature assigned on all extensions
in the Incoming Group.
(Assignable only when "Terminate," "Ring" or "UCD" is specified
in "Group Type" programming.)
Reference None
Parameter Search Mode
Default UCD
Value Range
1. UCD
2. Sequential
Description/Function Specifies the search mode for extensions.
(Assignable only when "Operator (Single)" or "UCD" is specified
in "Group Type" programming.)
1. UCD:
The system selects the extension following the last one called as
the destination extension.
2. Sequential:
The system selects the extension assigned first in the Incoming
Group as the destination extension.
Reference • 1.3 System Features (F/G)
– Incoming Group
• 1.5 Attended Features (F/G)
– Uniform Call Distribution (UCD)
• 1.6 Originating Features (F/G)
– Operator Call
To Next Page
Loading...
