Panasonic KX-TD500 - [Serial Interface Port] SMDR - Parity; [Serial Interface Port] SMDR - NL Code; [Serial Interface Port] SMDR - Word Length

Maintenance
332 Programming Guide
Parameter [Serial Interface Port] SMDR – Parity
Default None
Value Range
1. None
2. Mark
3. Space
4. Even
5. Odd
Description/Function A parity code indicates what type of parity is used to detect an error
in the string of bits composing a character. Make an appropriate
selection depending on the requirements of your printer or personal
computer.
Reference None
Parameter [Serial Interface Port] SMDR – NL Code
Default CR + LF
Value Range
1. CR+LF
2. CR
Description/Function Specifies the NL (New Line) Code for your printer or personal
computer.
If your printer or personal computer automatically feeds lines with
a carriage return, select "CR (Carriage Return)."
If not, select "CR+LF (Line Feed)."
Reference None
Parameter [Serial Interface Port] SMDR – Word Length
Default 8 bits
Value Range
1. 7 bits
2. 8 bits
Description/Function Defines the number of bits in each byte or character.
Reference None