Group
Programming Guide 125
Parameter Group No.
Default 1
Value Range 1-48
Description/Function Specifies the trunk group (1-48) which you are going to
programme.
Reference • 1.3 System Features (F/G)
– Trunk Group
Parameter Type
Default Public
Value Range
1. Public
2. Private
3. VPN (Virtual Private Network)
Description/Function Specifies the network type for the trunk group.
Reference • 3.1 TIE Line Features (F/G)
– TIE Line Service
• 3.2 VPN Features (F/G)
– Virtual Private Network (VPN)
Parameter Copy
Default —
Value Range —
Description/Function You can enter into "Trunk Group Copy" screen by clicking this
button.
Reference —
To Next Page
Loading...
