Line
Programming Guide 225
4.8 PC Console Line
4.8.1 PC Console Line 1/2
Used to assign parameters for PC Console lines.
Parameter Card No.
Default —
Value Range XXX:YYY [XXX: Card No. (101-314), YYY: Card Type]
Description/Function Specifies the physical number of the extension card and its type
(DLC or DHLC).
Reference •1.2 Slot Assignment (P/G)
Parameter Port No.
Default —
Value Range 1:DHLC card, 1 and/or 9 :DLC card
Description/Function Specifies the extension port which you are going to programme.
Reference •1.4 Extension Port Assignment (P/G)
To Next Page
Loading...
