Panasonic KX-TD500 - Extension-To-CO Line Call Duration Time; CO-To-CO Line Call Duration Time; Automatic Redial Interval Time

System
Programming Guide 83
Parameter Extension-to-CO Line Call Duration Time
Default 10 min
Value Range 1-64 min
Description/Function Specifies the maximum time allowed for a call with an outside
party.
This time limit can apply to outgoing CO calls only or both
outgoing and incoming CO calls. This is determined by "5. Limited
call duration" setting in Section "2.8 System Option."
Note
• This timer applies to the extension user who is restricted by
"Time Limit of Outside Calls" setting in Section "2.4 Class
of Service (COS)."
Reference None
Parameter CO-to-CO Line Call Duration Time
Default 10 min
Value Range 1-64 min
Description/Function Specifies the maximum time allowed for a call between two outside
parties (CO-to-CO line call).
If this timer expires during a CO-to-CO line call, it will be
disconnected.
Reference • 1.5 Attended Features (F/G)
– Direct Inward System Access (DISA)
• 1.11 Transferring Features (F/G)
– Call Forwarding
– Call Transfer
• 2.8 System Option (P/G)
– TIE-CO/CO-TIE Line Call Duration Restriction
Parameter Automatic Redial Interval Time
Default 60 s
Value Range 30-1200 s
Description/Function Specifies the interval time between each Automatic Redial attempt.
Reference • 1.7 Dialling Features (F/G)
– Redial, Automatic