Panasonic KX-TD500 - Trunk Port Assignment

Configuration
Programming Guide 11
1.3 Trunk Port Assignment
Used to assign each trunk port in the system to one of up to 48 trunk groups.
Parameter Card No.
Default —
Value Range XXX : YYY [XXX : Card No. (101-314), YYY : Card Type]
Description/Function Specifies the physical number of the trunk card and its type, which
you are going to programme.
Reference • 1.2 Slot Assignment (P/G)
Parameter Group No.
Default DID/DID-2W/DID-MFC card: 47, E&M card: 48, Others : 1
Value Range 1 - 48
Description/Function Specifies the trunk group (1-48) to which the trunk port is assigned.
Note
• Each trunk port must be assigned to a Trunk Group.
This programme defines the Trunk Group assignment for
each trunk port.
Reference • 1.3 System Features (F/G)
– Trunk Group
• 3.2 Trunk Group (P/G)