Panasonic KX-TD500 - [TIE Line] Type; [TIE Line] Sensitivity - in EXT; [TIE Line] Sensitivity - in CO; [TIE Line] Sensitivity - out EXT

Line
Programming Guide 181
Parameter [TIE Line] Type
Default 4 wires
Value Range
1. 2 wires
2. 4 wires
Description/Function Specifies the voice path type of TIE Lines.
Reference • 3.1 TIE Line Features (F/G)
– TIE Line Service
Parameter [TIE Line] Sensitivity - IN EXT
Default 0 dB
Value Range - 3 to +6 dB in 3 dB increments
Description/Function Specifies the voice level for reception.
Note
• When this setting is specified in a CO-to-CO and an
Extension-to-CO speech path respectively, the LPR software
version of the E&M card must be set to "2" or later. If the
LPR software version of the E&M card is less than "1," the
setting for a CO-to-CO speech path always works.
Reference • 3.1 TIE Line Features (F/G)
– TIE Line Service
Parameter [TIE Line] Sensitivity - IN CO
Default 0 dB
Value Range - 3 to +6 dB in 3 dB increments
Description/Function Specifies the voice level for reception.
Reference • 3.1 TIE Line Features (F/G)
– TIE Line Service
Parameter [TIE Line] Sensitivity - OUT EXT
Default 0 dB
Value Range - 3 to +6 dB in 3 dB increments
Description/Function Specifies the voice level for transmission.
Reference • 3.1 TIE Line Features (F/G)
– TIE Line Service