Panasonic KX-TD500 - Charge Limit; [COS No.] Primary; [COS No.] Secondary

Line
Programming Guide 189
Parameter Charge Limit
Default 0
Value Range 0: No limit
1-99999: The number of charge metre allowable for the extension
Description/Function Used to determine the sum total of telephone charge allowable to
extension users on an extension basis. If the telephone charge on
the extension exceeds the limit, a toll call cannot be made anymore
from that extension.
Note
• If the charge limit is set to "0," no restriction is applied.
Reference • 4.2 Charge Fee Management (Station Programming) (U/M)
• 1.3 System Features (F/G)
– Budget Management
Parameter [COS No.] Primary
Default 1
Value Range 1-96
Description/Function Specifies the Primary COS (Class of Service) to the extension.
Reference • 1.3 System Features (F/G)
– Class of Service (COS)
– Hotel Application
• 3.1.5 Changing Service Level of Extensions (Switching COS)
(U/M)
• 3.2.6 Hotel Use Features (Hotel Application) [KX-T7536, KX-
T7235 only] (U/M)
Parameter [COS No.] Secondary
Default 1
Value Range 1-96
Description/Function Specifies the Secondary COS (Class of Service) to the extension.
Reference • 1.3 System Features (F/G)
– Class of Service (COS)
– Hotel Application
• 3.1.5 Changing Service Level of Extensions (Switching COS)
(U/M)
• 3.2.6 Hotel Use Features (Hotel Application) [KX-T7536, KX-
T7235 only] (U/M)