Line
Programming Guide 215
Parameter Tenant No.
Default 1
Value Range 1 - 8
Description/Function Specifies the tenant (1-8) to which the doorphone port is assigned.
Reference • 1.3 System Features (F/G)
– Tenant Service
• 1.12 Conversation Features (F/G)
– Doorphone Call
• 2.2 Tenant (P/G)
Parameter Destination – Day / Night
Default Blank
Value Range 3-4 digits consisting of 0-9
Description/Function Specifies the extensions that ring when a visitor presses the
doorphone button.
Up to 126 destination extensions per doorphone can be assigned in
Day mode and Night mode respectively.
Destination extensions can unlock the door opener.
Reference • 2.8.1 If a Doorphone/Door Opener is Connected (U/M)
To Next Page
Loading...
