Panasonic KX-TD500 - [LCS Setting] Status; [LCS Setting] Operation Mode; [LCS Setting] Recording Mode; [LCS Setting] LCS Password

Line
192 Programming Guide
Parameter [LCS Setting] Status
Default Inactive
Value Range
1. Inactive
2. Active
Description/Function Specifies whether or not the extension can use the LCS (Live Call
Screening) feature.
Reference • 1.9 Answering Features (F/G)
– Live Call Screening (LCS)
Parameter [LCS Setting] Operation Mode
Default Hands-free
Value Range
1. Private
2. Hands-free
Description/Function Assigns whether the voice message being recorded is monitored
automatically through the built-in speaker (Hands-free mode) or an
alert tone is sent (Private mode) while an incoming caller is leaving
a message in the mailbox of the extension.
Reference • 1.9 Answering Features (F/G)
– Live Call Screening (LCS)
• 4.1.1 Initial Settings (U/M)
Parameter [LCS Setting] Recording Mode
Default Stop Rec
Value Range
1. Keep Rec
2. Stop Rec
Description/Function Assigns whether to close the mailbox or keep recording the
conversation after a call is interrupted.
Reference • 1.9 Answering Features (F/G)
– Live Call Screening (LCS)
Parameter [LCS Setting] LCS Password
Default Blank
Value Range Fixed to 3 digits consisting of 0-9
Description/Function Specifies the 3-digit password for LCS settings.
Reference • 1.9 Answering Features (F/G)
– Live Call Screening (LCS)
• 2.8.3 If a Voice Processing System is Connected (U/M)