Panasonic KX-TD500 - General Programming Instructions

System
108 Programming Guide
Parameter 36. Tone Mode
Default Type-3: [SA], Type-4: [HK], Type-1: Others
Value Range
1. Type-1
2. Type-2
3. Type-3
4. Type-4
5. Type-5
6. Type-6
7. Type-7
Description/Function Specifies the Tone output type.
Note
• The change of this parameter is activated after resetting the
system.
Reference None
Parameter 37. Ring Mode
Default Type-3: [SA], Type-1: Others
Value Range
1. Type-1
2. Type-2
3. Type-3
4. Type-4
5. Type-5
6. Type-6
Description/Function Specifies the Ringing Tone type.
Note
• The change of this parameter is activated after resetting the
system.
Reference None
Parameter 38. First Digit Time-out Process
Default Don’t release the trunk
Value Range
1. Release the trunk
2. Don't release the trunk
Description/Function Specifies the treatment of the trunk line when no digits are dialled
before the First Digit timer expires.
Reference None