Features
250 Programming Guide
5.6 Account Code
Used to programme a list of up to 1000 account codes which are used to identify incoming and
outgoing CO calls for accounting and billing purposes.
Parameter Tenant No.
Default 1
Value Range 1-8
Description/Function Specifies the tenant to which a list of Account Codes is assigned.
(Required when "Tenant Service" is employed.)
Reference • 1.3 System Features (F/G)
– Tenant Service
• 2.2 Tenant (P/G)
Parameter Entry No.
Default 0001-0020
Value Range 0001-1000 in 20 codes increments
Description/Function Specifies the entry number of the Account code which you are
going to programme.
Reference None
To Next Page
Loading...
