Line
Programming Guide 239
Parameter Intercept Destination – Day / Night
Default Blank
Value Range 3-4 digits consisting of 0-9
Description/Function Specifies the destination extension (3 or 4 digits) for Intercept
Routing feature in both Day and Night modes respectively.
Notes
• Intercept Routing provides an automatic re-direction of calls
that have not been answered.
• There are six possible destinations of intercepted call:
(1) An extension, (2) an external pager (TAFAS),
(3) an OGM group, (4) an extension group,
(5) an incoming group, or (6) a phantom extension.
Reference • 1.11 Transferring Features (F/G)
– Intercept Routing
Parameter Call Forwarding-No Answer Time
Default 0 ring
Value Range 0-12 rings
Description/Function Specifies the number of rings before the Call Forwarding No
Answer feature is activated.
If a call is not answered before the programmed number of rings,
the call is redirected to the pre-assigned extension.
Note
• If "0" is specified, "Call Forwarding-No Answer Time"
setting in Section "2.5 System Timer" works.
Reference • 1.11 Transferring Features (F/G)
– Call Forwarding
• 2.5.1 Forwarding Your Calls (Call Forwarding) (U/M)
• 2.5 System Timer (P/G)
To Next Page
Loading...
