Group
Programming Guide 153
3. Select the Incoming Group parameters to copy in "Copy Item" field.
• Only parameters which are available to copy are shown in "Copy Item" field.
This depends on the Group Type assignment of the copy source Incoming Group.
• Items marked with " " are copied.
4. Point to in the "Destination Incoming Group" field and click.
• All displayed Incoming Group Nos. will be marked with " ."
• You can also specify one or several Incoming Groups as the copy destination by clicking
it (them) directly.
5. Point to and click.
• "Are you sure?" is displayed.
6. Point to and click.
• "Copying" is displayed while the source data is being copied to the destination.
• Parameters of the destination Incoming Groups are immediately effective when copying
is finished.
Parameter Group No.
Default 1
Value Range 1-96
Description/Function Specifies the Incoming Group (1-96) which you are going to
programme.
Reference • 1.3 System Features (F/G)
– Incoming Group
Parameter Copy
Default —
Value Range —
Description/Function You can enter into "Incoming Group Copy" screen by clicking this
button.
Reference —
To Next Page
Loading...
