Configuration
Programming Guide 21
Parameter Type
Default None
Value Range
1. None
2. TVP75
3. TVP100
4. TVP200
5. TVP200-1
6. TVP300
Description/Function Specifies the model number of the Panasonic Voice Processing
System which will be connected to the VPS card.
Note
• Please select "TVP200-1," if HDD (Hard Disc) Software
Version of your TVP200 is 2.00 or later.
Reference • 1.3 System Features (F/G)
– Integration, VPS
Parameter Jack No.
Default (Display only)
Value Range —
Description/Function Displays the Jack No. of VPS.
Reference • 1.3 System Features (F/G)
– Integration, VPS
Parameter Port No.
Default Blank
Value Range 1-16 [DLC card] or 1-8 [DHLC card]
Description/Function Specifies the extension port to which the VPS (DPT) jack is to be
connected.
Notes
• This programme tells the system which extension port is
connected to the Panasonic Voice Processing System.
This allows the system to send the proper Digital Integration
information to these ports.
• The port number is displayed only when the attribute of the
port is assigned to VPS (DPT).
Reference • 1.4 Extension Port Assignment (P/G)
To Next Page
Loading...
