Panasonic KX-TD500 - Page 229

Line
Programming Guide 229
Parameter [COS No.] Primary
Default 1
Value Range 1-96
Description/Function Specifies the Primary COS (Class of Service) to the PC Console.
Reference • 1.3 System Features (F/G)
– Class of Service (COS)
– Hotel Application
• 3.1.5 Changing Service Level of Extensions (Switching COS)
(U/M)
• 3.2.6 Hotel Use Features (Hotel Application) [KX-T7536, KX-
T7235 only] (U/M)
Parameter [COS No.] Secondary
Default 1
Value Range 1-96
Description/Function Specifies the Secondary COS (Class of Service) to the PC Console.
Reference • 1.3 System Features (F/G)
– Class of Service (COS)
– Hotel Application
• 3.1.5 Changing Service Level of Extensions (Switching COS)
(U/M)
• 3.2.6 Hotel Use Features (Hotel Application) [KX-T7536, KX-
T7235 only] (U/M)
Parameter [Preferred Line] Outgoing
Default Prime Line – ICM / PDN
Value Range
1. No Line
2.
Idle Line
3. Prime Line – ICM / PDN
4. Prime Line – CO
Description/Function Specifies the line to which the PC Console is connected
automatically when the PC Console user goes off-hook to make a
call.
Reference • 1.6 Originating Features (F/G)
– Line Preference—Outgoing (Idle Line/No Line/Prime Line)